QC Series Laboratory Deionized Water Machine Instructions

Alex
2019-01-29

QC Series Laboratory Deionized Water Machine Instructions

1.The main function of ultra pure water machine characteristics

Ultra pure water equipment is using the current international most advanced technology of RO, RO membrane

is a kind of using pressure drive makes the reverse osmosis membrane separation of water molecules.Because of its surface aperture 0.0001 microns (0.1 nm), so   it can effectively remove impurities of bacteria in water, soluble salts, organic matter, heavy metal ions and microorganisms, bacteria, harmful substances such as pesticide residues.Water after RO filter can remove more than 90% of the ions in water and other soluble solid, this greatly reduce the follow-up of ion exchange column load (pure water), thereby reducing the number of replacement of ion exchange resin.After the pure water, water resistivity can reach 10 m Ω.Cm.Can meet most of the high water quality requirements of enterprises and units, schools and research institutions.

The whole process for fully automatic computer control system of water, after open the power switch, when raw

water pressure is low or the water valve closed system, automatic stop, automatic low pressure protection, high downtime.

Outlet pipe installation online water quality monitor, so you can understand the situation of water quality at any time.

Functional features

Full automatic self-washing

Cut off the water intelligently if leaking

poor water quality indication

multi-protection and two types of water connector,which could provide both Level Ⅲ water labs

⑤Use the tap-water as the water supply and can use for various water quality

⑥Double wavelegth UV sterilization system

Technical parameters

      Model

Q-10C

Q-20C

Q-30C

Rated voltage

AC220V 50HZ

AC220V 50HZ

AC220V 50HZ

Working voltage

DC24V

DC24V

DC24V

Rated power

30W

40W

50W

Standby power

<3W

<3W

<3W

Rated capacity

(10L/H

(20L/H

30L/H

Inflow water conductivity

<300us/cm

<300us/cm

<300us/cm

Outflow water conductivity

18.2MNaN

18.2MNaN

18.2MNaN

Raw water pressure

0.2-0.5MPa

0.2-0.5MPa

0.2-0.5MPa

Notice:

Inflow water TDS > 200 PPM, high hardness of source water area suggest matching external softener.QC Series Laboratory Deionized Water Machine Instructions.jpg






分享